Black-and-white negative film · Discontinued

ADOX Silvermax

ADOX Silvermax is a black-and-white negative film rated at ISO 100, developed in Black-and-white. Below: specs, an exposure guide and similar stocks.

ISO 100Black-and-whiteDiscontinued135-36
ISO 100
Box speed
Black-and-white negative
Type
Black-and-white
Process
Discontinued
Status
2016–2020
Years made

Film specifications#

Manufacturer
ADOX
Film
Silvermax
Speed
100
Process
B&W
Formats
135-36
Base
Triacetate
Made in
Germany
Status
Discontinued

Character & history#

Fine grain ortho-panchromatic film on a clear triacetate base similar to original AGFA APX 100. The film was produced as a single run using end of line Agfa base material and photochemicals in 135 format only. SCALA was the same film but packaged to promote its suitability for reversal.

Description adapted from Wikipedia’s “List of discontinued photographic films” (CC BY-SA 4.0).

Exposure guide at ISO 100#

Sunny 16 for this film: f/16 at 1/100 s in bright sun. Negative film tolerates 2–3 stops of overexposure; slide film needs accuracy within about ⅓–½ stop.

Lightf/2f/4f/8f/16
EV 16 · Snow / beach, bright sun——1/1000 s1/250 s
EV 15 · Bright sun—1/2000 s1/500 s1/125 s
EV 14 · Hazy sun—1/1000 s1/250 s1/60 s
EV 13 · Cloudy-bright1/2000 s1/500 s1/125 s1/30 s
EV 12 · Overcast / open shade1/1000 s1/250 s1/60 s1/15 s
EV 10 · Sunset1/250 s1/60 s1/15 s1/4 s
EV 8 · Bright interior1/60 s1/15 s1/4 s1 s
EV 5 · Home interior at night1/8 s0.5 s2 s8 s
EV 3 · City street at night0.5 s2 s8 s30 s

Push & pull options#

Tell your lab how many stops you pushed or pulled so development is adjusted for the whole roll.

AdjustmentRate the film atEffect
Pull 1 stopEI 50Lower contrast, finer grain
Push 1 stopEI 200More contrast and grain
Push 2 stopsEI 400Strong contrast, coarse grain, blocked shadows
Push 3 stopsEI 800Strong contrast, coarse grain, blocked shadows
Developing Black-and-white: Traditional black-and-white development (e.g. D-76/ID-11, HC-110, Rodinal, XTOL) — easy to do at home.

Long exposures#

Most films suffer reciprocity failure beyond about 1 second: they need more exposure than the meter says. As a rule of thumb add ⅓–1 stop for 1–10 s and 1–2 stops beyond 10 s for older emulsions; modern T-grain films (and Fuji Acros) need much less. Check the manufacturer's datasheet.

More ADOX films#

Frequently asked questions#

What ISO is ADOX Silvermax?

100 — set your meter to ISO 100 for box speed.

Is ADOX Silvermax still made?

No, it has been discontinued (2016–2020).

How do I develop ADOX Silvermax?

B&W process. Traditional black-and-white development (e.g. D-76/ID-11, HC-110, Rodinal, XTOL) — easy to do at home.

Is ADOX Silvermax available in 35mm?

Yes — formats: 135-36.

Sources & licences#

Last updated October 03, 2026 · How we calculate · Sources